Gilderflukeco Frequency Shift Keyed/Remote Terminal Unit Bedienungsanleitung Seite 19
- Seite / 29
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
- String Setup -
STRINGS are the ASCII characters and commands which you can tell the FSK/RTU send at the start or
end of any show through its serial port. The Strings used in the FSK/RTU are similar to those used in
PC•MACs or the Smart Brick Animation Control Systems. They are used primarily to talk to LaserDisk and
Compact Disc players or just to tell the FSK/RTU to close the contacts on its tape deck control outputs.
They can also be used to send commands through the serial port to any other piece of show equipment
that needs a serial input to start or stop it, or even just to print on a monitoring screen that a show has
started or ended.
When using the FSK/RTU with a LaserDisk or Compact Disc, you will typically use the STOP string to
pause the player, the PLAY string to tell the player to start playing, and the REWIND string to spin up the disk
position the player to the beginning of the first show.
The ‘enter string’ command leads to the following String Setup Screen (the default configuration is
shown):
-Gilderfluke & Company - RTU/FSK Controller - version 2.00 - copyright 1994 DCM-
a) Stop String:
05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
b) Play String:
06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c) Rewind String:
07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
x) eXit
command-
Characters are entered into the strings as HEXadecimal ASCII characters. As an example of using
ASCII:
To send a letter “a”, you enter the HEXadecimal value of 61.
If bit seven of any ASCII character is set to =1, then instead of sending the character out the serial
port, the FSK/RTU will wait until it receives this character through the serial port. As an example of using
ASCII to receive a character:
To wait until the FSK/RTU receives a letter “a”, you enter a value of E1.
If the FSK/RTU receives a different character than it was expecting, then the DATA ERROR LED will flash
momentarily. Use the ‘Special Character’ 80h if you don’t care what character is to be received.
The strings are up to 80 characters long. They are sent as part of a start, stop or rewind sequence. The
default strings simply close the Stop, Play and rewind relays, respectively. All the characters in a string will
be sent until a ‘00’ is encountered or the end of the string is reached.
When entering any of the strings, you can stop at any time by just pressing the <ESC>ape key. You
don’t need to enter in all 80 characters in each string. This will conclude (not abort) the string entry com-
mand.
GILDERFLUKE & CO. • 205 SOUTH FLOWER ST. • BURBANK, CALIF. 91502-2102 • 818/840-9484 • FAX818/840-9485
15 of 25
- Frequency Shift Keyed (FSK) / 1
- Remote Terminal Unit (RTU) 1
- 2.2 K ohm 8
- 1/4 watt resistor 8
- PEAK COLLECTOR CURRENT 9
- AS A FUNCTION OF DUTY CYCLE 9
- FSK/RTU CONFIGURATION: 13
- ONE START BIT 14
- EIGHT DATA BITS 14
- ONE or TWO STOP BITS 14
- Main Configuration Screens: 15
- Summary of Setup Commands: 18
- - String Setup 19
- Special String Characters: 20
- - SONY LaserDisk COMMANDS 26
Verwandte Produkte und Handbücher für Audio Gilderflukeco Frequency Shift Keyed/Remote Terminal Unit
(48 Seiten)Simpson Strong-Tie CS16Z manuels
Manuels d'utilisation et guides de l'utilisateur pour Non Simpson Strong-Tie CS16Z.
Nous fournissons des manuels en pdf 1 Simpson Strong-Tie CS16Z à télécharger gratuitement par type de document : Guide d'installation
Kommentare zu diesen Handbüchern